Siemens V20 7.5kW 400V 3ph AC Inverter Drive, C3 EMC


Order Code: 28688
2 in stock (3+ normally 7-9 days)
Order by 3pm for next working day delivery*

List Price: £590.00

(excl. VAT)
(inc. VAT )
Price break
per unit

Condition: New with Warranty
Brand: Siemens, Range: SINAMICS V20

Siemens V20 series AC Frequency Inverter for 7.5kW (10HP) 400V three phase motor in VxF control to 16.5A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.

Size FSD: 240mm Wide x 172.5mm Deep x 206.5mm High IP20.
Cooling: Two fans.
Weight: 4kg.

Overload: 150% x 60 seconds followed by 94.5% for 240 seconds (High Overload)
Speed Control Range: 0-550Hz
Braking: To 27 Ohm minimum, external resistor (not supplied) - See the Resistor options linked below or use the 'Which Resistor' button on this page.

Integrated Keypad, 2 Analogue/Digital Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Output, 1 Relay Contact Set, 1 Expansion Port, DC Bus Terminals, Terminals for Modbus RTU or USS over RS485 Communications.
Input Current: 20.7A
Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial).

Cubicle mount.
Rated 40°C Ambient.
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 15mm or 0mm between V20 drives.
Heat Loss at max output: 180W
Mounting via 4 holes at rear for M5 screws on 223mm x 166mm centres.

Manufacturer part number is 6SL3210-5BE27-5CV0. Sometimes specified as 6SL32105BE275CV0.

Download the Siemens V20 Manual and Quick Start Guide from the links below:-