Siemens V20 series AC Frequency Inverter for 4kW (5HP) 400V three phase motor in VxF control to 8.8A. Converts fixed frequency three phase 400V input to variable frequency three phase 400V to control the speed of a standard AC Induction motor.
Size FSB: 140mm Wide x 164.5mm Deep x 160mm High IP20.
Cooling: Single fan.
Overload: 150% x 60 seconds followed by 94.5% for 240 seconds (High Overload)
Speed Control Range: 0-550Hz
Braking: via optional Dynamic braking module - see linked products below.
Integrated Keypad, 2 Analogue/Digital Inputs, 4 Digital Inputs, 1 Analogue Output, 1 Digital Output, 1 Relay Contact Set, 1 Expansion Port, DC Bus Terminals, Terminals for Modbus RTU or USS over RS485 Communications.
Input Current: 11.3A
Input Voltage: 380-480V Three Phase -15% +10% at 50-60Hz ±5%
EMC Compliance: IEC EN 61800-3 Category C3 (Industrial).
Rated 40°C Ambient.
Ventilation space in front: [not specified], above: 100mm, below: 100mm, at sides: 15mm or 0mm between V20 drives.
Heat Loss at max output: 100W
Mounting via 4 holes at rear for M4 screws on 127mm x 135mm centres.
Manufacturer part number is 6SL3210-5BE24-0CV0. Sometimes specified as 6SL32105BE240CV0.
Download the Siemens V20 Manual and Quick Start Guide from the links below:-