Siemens SINAMICS G120C Series AC Inverter for a 1.5kW (2HP) 400V Three Phase Motor to 4.1A at High Overload or 2.2kW (3HP) to 5.6A when Fan/Pump rated. Operates in VxF, or Sensorless Vector Control and converts fixed frequency three phase 400V Input to variable frequency three phase 400V for speed and torque control of a standard AC Induction Motor.
Does not include operator keypad, see linked products below for compatible options.
Frame Size AA, 73mm Wide x 155mm Deep x 181mm High (BOP-2 Keypad adds 6mm to depth, IOP adds 21mm).
Enclosure Rating: IP20.
Weight: 1.1kg.
1.5kW, 4.1A: 150% overload for 57 seconds every 5 minutes. 200% for 3 seconds every 5 minutes. (High Overload / Constant Torque)
2.2kW, 5.6A: 110% overload for 57 seconds every 5 minutes. 150% for 3 seconds every 5 minutes. (Fan/Pump Rated / Variable Torque)
Braking (DBr): to 140 Ohm minimum external resistor (not supplied). See Brake Resistors below. Only fit Braking Resistor if Dynamic Braking is required.
1 Analogue Input, 1 Analogue Output, 6 Digital Inputs, 1 Digital Output, 1 Relay Contact set, Motor Temperature Terminals, USB Interface (Mini-B type) for PC, Slot for memory card (MMC or SD).
Fieldbus: USS / Modbus RTU
'Safe Torque Off' (STO) function to SIL 2 (EN 61508) via Digital Inputs. 2 Digital Inputs can be reassigned for this purpose if required.
Output Frequency: 0-240Hz (Sensorless Vector) or 0-550Hz (V/F)
Input Voltage: Three Phase 380V to 480V +10% -20% at 50-60Hz ± 5%.
Input Current: 6A at High Overload, 7.4A when Fan/Pump rated.
EMC Filters: Internal, to IEC 61800-3 Class A Category C2 (Industrial)
Mounting: Cubicle mount via 2 x M4 bolts (not supplied) at rear on 160mm centres.
Ambient Temperature: Rated 40°C.
Ventilation space in front: [not specified], Ventilation space above: 80mm, Ventilation space below: 100mm, Ventilation space at sides: 0mm.
Heat Loss at max output: 91W
Manufacturer part number: 6SL3210-1KE15-8AB2. Same rating as 6SL3210-1KE15-8AB1 but in a smaller frame size.
Recommended replacement for Micro Master 420 6SE6420-2UD21-5AA1
Download the Siemens SINAMICS G120C Manual and Getting Started Guide from the links below:-